Warehouse Management

Warehouse Management (WMS) Systems & Software, picking, Third party logistics, Inventory control, TMS, YMS, Cross docking, Virtual Warehouse and Web based WMS for optimal stock control in the warehouse.

More in store

30-May-2018
More in store
Dematic has expanded its solution set to include AutoStore, the ultra-high density goods-to-person piece picking system, giving omni-channel businesses the opportunity to quadruple their storage density for fast order fulfilment. By Daniel Aspin, Sales Lead at Dematic Northern Europe for AutoStore and James Smith, Business Development Manager at AutoStore.

Logistics is facing a new reality: eCommerce has shifted the focus from unit loads to singles, businesses are experiencing ever increasing demands for enhanced customer service, special events such as ‘Black Friday’ are creating huge disruptive peaks and warehouses are under constant pressure to perform – all this set against rising costs, shrinking labour availability and constricted warehouse space.

How can businesses adapt their existing warehouse operations to meet today’s new demands?

Distribution centres are now expected to do more, with less. Space is at a premium and moving location is both disruptive and expensive. So what can be done to maximise the efficiency and performance of existing sites, many of which may be of an awkward layout or restricted by columns? And how do you mitigate against rising labour costs and availability issues when you have a growing piece picking requirement?

A new partnership forged between Dematic and AutoStore may hold the answer to many of these challenges. AutoStore is a revolutionary concept, it is an ultra-compact storage and goods-to-person piece picking solution, and it is now available through Dematic, the leading global supplier of automated warehouse technology. As pioneers of cube storage, AutoStore has established a worldwide footprint of over 230 installations across 15 market sectors since its first application 15 years ago.

Whereas traditional shelving layouts are designed for people, wasting space with aisles and walkways, AutoStore offers a highly compact and cost-effective storage and order picking system for small items and packages, accessed and served by a fleet of intelligent robots.

Goods are stored in bins, stacked together in tight configuration, side-by-side and on top of each other, forming a dense block of bins housed in an aluminium grid that can be up to six metres deep and with a footprint as wide or as varied as needed. Storage space is fully utilised and, as AutoStore is built around the goods-to-person principle, robots do all the ‘walking’, fetching and putting-away, by travelling on top of the aluminium grid and then digging down to access each bin as required.

Flexibility and redundancy is assured as any robot can access any bin.

Retrieved bins are carried away to infeed/outfeed ports or picking stations, of which there are three configurations available as options, depending upon the capacity requirements of the system: conveyor port for up to 240 bins per hour, carousel port for up to 450 bins per hour or swing port for 160 bins per hour when mounted eight metres below the grid. These ports can be installed on all sides of the grid, or even under the grid when located on an upper floor.

Significantly, AutoStore shrinks the amount of space required for storage to 25% of the volume of a conventional store – which, put another way, means you can quadruple the inventory capacity of an existing building without having to extend or move. And the size of the installation can be completely variable, from just 1000 bins served by three robots, right up to a vast installation of 200,000 bins with over 100 supporting robots. What’s more, AutoStore’s inherent scalability and flexibility allows for easy upgrades and extensions to the system – simply increase the size of the grid or add extra robots as needed.

The system is particularly well suited to existing buildings, where an awkward layout or pillars may preclude other forms of automation. Its light, aluminium construction and use of intelligent robots give it immense flexibility, enabling the system to be built around obstacles and within difficult or irregular spaces – maximising storage density and space utilisation.

The robots themselves are independent units, battery operated and controlled by WiFi under the command of the AutoStore control system, with the content of the bins managed by Dematic iQ software or customer-specific WMS software. Each robot has two sets of wheels that enable the intelligent machines to traverse the grid and access any bins, as required.

Every robot is equipped with a hoist that allows the machine to pull out lower bins in the grid, which in larger systems may be 5.4m below the surface. As the bins come in two sizes – 649mm x 449mm base by 330mm for a high bin and 220mm for a low bin (designed to take a 600mm x 400mm box) – the maximum stack is either 16 or 24 units, depending on the size of bin. Although digging down takes a little longer, the clever ordering of the system places fast moving items nearer the top, with slower moving products gravitating towards the lower levels.

This makes AutoStore particularly attractive to businesses with a large number of SKUs as the Pareto principle will tend to prescribe that the top 20% of fast movers will be on top of the matrix.

AutoStore appeals to a wide range of industries and has been installed across businesses involved in apparel, hobbies and sports equipment, jewellery, pharmaceuticals, parts centres, electrical components and electronics, sanitation supplies, paper and packaging and a host of eCommerce and web shop applications.

One efulfilment business in the Netherlands gained 75% more storage capacity per square meter following the implementation of an AutoStore system with 30,000 plastic bins. The company now works four times as efficiently as before and has a significantly reduced error rate.

Security can also be an important consideration for many businesses. As humans cannot easily access product in an AutoStore grid – as there are no open shelves and walkways – the system is inherently secure. What’s more, power consumption is low too. Ten robots use the same energy as one vacuum cleaner, and unlike people, they don’t need lights.

Built in redundancy is another big plus factor for AutoStore, particularly when compared to AS/RS and other more traditional automated solutions for feeding goods-to-person systems. If a crane goes down, that’s quite a problem. However, if a robot develops a fault it can be simply taken out of service and its task will be taken over by another robot – so essentially no, or little, downtime.

Of course, creating a solution with a capacity geared to the needs of an expanding business requires close consideration and analysis of throughput, SKU range, pick rates and peaks, as well as a view on expected future demand. The scalability and flexibility of AutoStore allows each installation to be configured specifically to the demands of just about any business, as almost any speed can be achieved by adding enough robots, bins and workstations. In fact, the system can be configured to realise thousands of picks per hour.

Businesses looking for a step-change in performance from their existing manual operations may well find AutoStore the best all-round solution ¬– without having to move or extend the warehouse.

AutoStore is an important addition to Dematic’s wide portfolio of automated storage solutions for supporting goods-to-person piece picking operations. For further information go to www.dematic.com

Experts in Their Fields: Ardex Automates Material Flow and Logistics with inconso and SAP EWM
2 weeks ago
Renovotec Launches Warehouse ‘Network Healthcheck’ Service
2 weeks ago
Jungheinrich Miniload STC 2B1A: Automated small parts warehouse for VAHLE Group in Kamen
3 weeks ago
How Vimto created a ‘liquid’ supply chain with Distributed Warehousing
3 weeks ago
B2A Technology automates the new 27,000 m2 warehouse of the Castel Group
3 weeks ago
BEUMER opens sales office "West" for retrofitting systems from any supplier
4 weeks ago
Automatic sheet metal storage system ensures efficient processes
4 weeks ago
Logistics Service Provider B+S Logistik Achieves Rapid Ecommerce Growth using Descartes pixi* WMS
1 month ago
inconso’s SAP Recognized Expertise for SCM/EWM Again Confirmed by SAP
1 month ago
Indigo WMS toasts success with new Loch Lomond Whiskies project
1 month ago
Semi-automatic logistics solution for Germany's largest noodle factory
1 month ago
inconso presents extended features and availability as SaaS with new release
1 month ago
‘Secure Start’ for warehouse projects
2 months ago
Trago Mills opens new 200,000 square foot megastore complete with Jungheinrich
2 months ago
Always Keeping an Eye on Stock: ELSEN GmbH & Co. KG Uses Infor for Warehouse Management
2 months ago
Amir Reza Sinai is the new managing director of the subsidiary in Thailand A fresh breeze in Asia
2 months ago
Jungheinrich UK announces new Sales Director
2 months ago
Jungheinrich: "Your Connection To Success"
2 months ago
Jungheinrich Annual General Meeting: Strong 2017 – good start to 2018
2 months ago
Bergzeit Relies on the Warehouse Management System inconsoWMS S
3 months ago
Managing increasing customer demand proving difficult for online retailers
3 months ago
Active Nutrition International Takes PowerBar and Dymatize Online Using the Descartes pixi* WMS
3 months ago
Indigo Appoints Group CEO And Expands Executive Leadership Team
3 months ago
Dematic Introduces Enhanced Goods-To-Person Solution To Better Extend Order Cutoff Times
3 months ago
TGW's Rovolution robot picker marks new era in materials handling automation
3 months ago
Harro Foods to roll out Accord Warehouse Management System
3 months ago
Diamond Logistics and pi-top: Growing Together
3 months ago
rfxcel Launches Fully Integrated Edge Solution with Partner Navitas
3 months ago
HYDAC and inconso Expand Cooperation
3 months ago
‘Power Buy the Hour’ mobile app launched for game changing range of Jungheinrich rental packages
3 months ago
Jungheinrich WMS named “Best Factory Software 2018”
3 months ago
First Jungheinrich Miniload
3 months ago
Doosan keeps manufacturing in motion at MACH 2018
4 months ago
World premiere of the ETV 216i: The world’s first reach truck with built-in lithium-ion battery
4 months ago
Dematic launches Robotics Center of Excellence
4 months ago
The 2017 financial year at Jungheinrich: double-digit growth – forecast met
4 months ago
Global Foods picks BCP to improve warehouse efficiency
4 months ago
Alstef and BA Robotic Systems Group to merge with the support of Future French Champions
4 months ago
Vado Invests In TouchPath Warehouse Management System
4 months ago
Peoplevox chosen as Magento’s WMS Partner
4 months ago
Intermedia Solutions Grows Business With ProSKU
4 months ago
Vanderlande joins forces with Toyota Material Handling at CeMAT
4 months ago
inconsoWMS X Controls Distribution Center of MEPHISTO
4 months ago
Jungheinrich: "Your Connection To Success"
5 months ago
TGW extends Triumph International's logistics centre
5 months ago
Infor and Integration Point Partner to Create Comprehensive, Network-based Global Trade Management Solution
5 months ago
Coastal Pet leads Indigo to further US expansion
5 months ago
inconso AG Expands Management Board
5 months ago
Vanderlande’s evolutions to be showcased at LogiMAT
5 months ago